BenQ MP510 User's Manual - Page 44

Temperature information, When the Temperature warning light is - lamp replacement

Get BenQ MP510 - SVGA DLP Projector PDF manuals and user guides
UPC - 840046017262
View all BenQ MP510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

12. Replace the lamp cover on the projector. 13. Tighten the screws that secure the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 14. Restart the projector. Do not turn the power on with the lamp cover removed. 15. Resetting the lamp counter Do not reset if the lamp is not replaced as this could cause damage. i. Press and hold Up on the projector for 5 seconds to display the total used lamp time. ii. Press AUTO on the projector or on the remote control to reset the lamp hour to "0". iii. Wait about 5 seconds to let the OSD disappear. Lamp usage timer reset 0 Hours Press "AUTO" to reset Temperature information When the Temperature warning light is on, it is warning you of the following possible problems: 1. The internal temperature is too high. 2. The fans are not working. Turn the projector off and contact qualified service personnel for further help. For more detailed information, please refer to "Indicators" on page 45. 44 Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Maintenance
44
14.
Restart the projector.
Do not turn the power on with the lamp cover removed.
15.
Resetting the lamp counter
Do not reset if the lamp is not replaced as this could cause damage.
i.
Press and hold
Up
on the projector for 5 seconds
to display the total used lamp time.
ii.
Press
AUTO
on the projector or on the remote
control to reset the lamp hour to “0”.
iii.
Wait about 5 seconds to let the OSD disappear.
Temperature information
When the Temperature warning light is on, it is warning you of the following possible
problems:
1.
The internal temperature is too high.
2.
The fans are not working.
Turn the projector off and contact qualified service personnel for further help. For more
detailed information, please refer to
"Indicators" on page 45
.
12.
Replace the lamp cover on the projector.
13.
Tighten the screws that secure the lamp cover.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screws.
Lamp usage timer reset
0 Hours
Press "
AUTO
" to reset