BenQ MP511 User Manual - Page 34

If you select Red and set its value at 0, only the saturation of pure red will be affected. Every adjustment made will reflect to the image immediately. 6. Press d to highlight Gain and adjust its values to your preference by pressing eLeft orfRight. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately. 7. Repeat steps 3 to 6 for other color adjustments. 8. Make sure you have made all of the desired adjustments. 9. Press MENU/Exit to exit and save the settings. 5. Other adjustments You can find other image quality fine-tune selections in the PICTURE menu as well. See "Picture menu" on page 44 for details. Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ Enter to display the Presentation Timer page. Presentation Timer Timer period Timer display Timer position Timer counting direction Always Top-left Count down On Off MENU Back 2. Press Down to highlight Timer Period and decide the timer period by pressing Left/ Right. The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments. If the timer is already on, the timer will restart whenever the Timer Period is reset. 3. Press Down to highlight Timer Display and choose if you want the timer to show up on the screen by pressing Left/ Right. Selection Description Always Displays the timer on screen throughout the presentation time. 1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s). Never Hides the timer throughout the presentation time. 34 Operation