BenQ MP620C User Manual - Page 39

Setting the presentation timer Presentation timer can indicate the remaining presentation time on the screen to help you achieve better time management when giving presentation. Follow these steps to utilize this function: 1. Go to Advanced > Presentation Timer or press TIMER SETUP on the remote control to enter timer setting directly. 2. Select On by pressing Left3/Right4. A confirmation message displays. Press Down 6 to confirm or press Up 5 to cancel. 3. Press 6Down to go to the next option and decide the timer period by pressing Left3/Right4. 4. Press 6Down and choose if you want the timer to show up on the screen by pressing Left3/Right4. 5. If you select Yes, press 6Down to go to the next option and set the timer position as in the upper left, upper right, lower left, or lower right corner by pressing Left3/ Right4. 6. Press 6Down and select your desired counting direction by pressing Left3/Right4. 7. Press 6Down and decide if you want to activate sound reminding by pressing Left3/ Right4. If you select Yes, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up. TIMER On/Show on the remote control is a multifunctional key. If the presentation timer is off, pressing this button for the first time will activate timer and second push on the button will display timer on the screen. If the timer is already on, pressing this button will display the timer on the screen. • The duration of the on-screen timer is consistent with your timer setting. For example, if you set the timer to always display, after pressing this button for the first time to activate the timer, it will remain on the screen. If you set the timer to never display, the timer will only display on the screen for 5 seconds. Then it will disappear. Please note the timer is still counting after hidden. • If the timer is already on, you need to reactivate the timer everytime a new timer period is set. Freezing the image Press Freeze on the remote control to freeze the image. An icon will display in the lower right corner of the screen. To release the function, press the Freeze button on the remote control, or the Source button on the projector control panel. Note that pressing the Source button will also change the input source. Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen. Operation 35