BenQ MP620C User Manual - Page 40

Utilizing FAQ function, Shutting down the projector - specification

Get BenQ MP620C - XGA DLP Projector PDF manuals and user guides
UPC - 840046095444
View all BenQ MP620C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Utilizing FAQ function Press and hold BLANK/Q? on the projector for 3 seconds or go to Advanced > FAQ function. Possible solutions to problems encountered by users regarding image quality, installation, special feature operation and service information are available to you. Use MENU6/ EXIT5 to select one out of these four major categories. Press Left3/Right4 for more specific questions. Then press 3Left/4Right for possible solutions. To exit, press EXIT5. Shutting down the projector 1. Press Power and a prompt message appears. Press Power a second time to turn the projector off. 2. The Power indicator light flashes orange and the lamp shuts down, the fans continue to run for approximately 30 seconds to cool down the projector. Are You Sure to Power Off? Press "Power" Again to Power Off To protect the lamp, the projector will not respond to any commands during the cooling process. 3. Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect the power cord from the wall socket. • Do not unplug the power cord before the projector shutdown sequence is complete or during the 30-second cooling down process. • If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press Power again to start the projector after the fans stop and the Power indicator light turns orange. 36 Operation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Operation
36
Utilizing FAQ function
Press and hold
BLANK/Q?
on the projector for 3 seconds
or go to
Advanced > FAQ function
. Possible
solutions to problems encountered by users regarding
image quality, installation, special feature operation and
service information are available to you. Use
MENU
6
/
EXIT
5
to select one out of these four major categories.
Press
Left
3
/Right
4
for more specific questions. Then
press
3
Left/
4
Right
for possible solutions. To exit, press
EXIT
5
.
Shutting down the projector
1.
Press
Power
and a prompt
message appears. Press
Power
a second time to turn
the projector off.
2.
The
Power indicator light
flashes orange and the lamp
shuts down, the fans
continue to run for
approximately 30 seconds to
cool down the projector.
To protect the lamp, the projector
will not respond to any commands
during the cooling process.
3.
Once the cooling process finishes, a
"
Power Off Ring Tone
" will be heard.
Disconnect the power cord from the
wall socket.
•
Do not unplug the power cord before the
projector shutdown sequence is
complete or during the 30-second
cooling down process.
•
If the projector is not properly shut
down, to protect the lamp, when you
attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power again to start the projector after the
fans stop and the Power indicator light turns orange.
Are You Sure to Power Off?
Press "Power" Again to Power Off