BenQ MP620P User Manual - Page 21
Connection, Connecting a computer or monitor, Connecting a computer
UPC - 840046016463
View all BenQ MP620P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 6). They are commercially available from electronics stores. Connecting a computer or monitor Connecting a computer The projector provides a VGA input socket that allows you to connect it to a laptop or desktop computer. Additionally, you can also connect the projector to a computer via the USB cable so you can perform paging operations of the application on the PC or notebook. (see "Remote paging operations" on page 26). To connect the projector to a laptop or desktop computer: 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of the VGA cable to the D-SUB/COMP IN signal input socket on the projector. 3. If you wish to use the remote paging function (see "Remote paging operations" on page 26), take the supplied USB cable and connect the larger end to the USB port of the computer, and the smaller end to the USB socket on the projector. 4. Take a suitable audio cable and connect one end of the cable to the audio output socket of the computer, and the other end to the Audio socket of the projector. The final connection path should be like that shown in the following diagram: Laptop or desktop computer USB cable Audio cable VGA cable Connection 15