BenQ MP620P User Manual - Page 37
Pro-Picture menu, Auto Resize, Aspect Ratio, H Position, H Size 0, Sharpness
UPC - 840046016463
View all BenQ MP620P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Pro-Picture menu Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen. FUNCTION (default DESCRIPTION setting / value) Automatically resizes the input signal pixel resolution to the native resolution of the projector. Auto Resize (on) On: The pixel resolution of the input signal is converted to the native resolution of the projector (1024 x 768). For input signals with lower resolutions, gaps in the pixels are automatically interpolated into the image before being projected. This may distort the image clarity. Off: The image is projected as its original resolution, with no pixel conversion. For input signals with lower resolutions, the projected image will display smaller than if resized to full screen. You could adjust the zoom setting or move the projector towards the screen to increase the image size if necessary. You may also need to refocus the projector after making these adjustments. There are two aspect ratio settings. Aspect Ratio (4:3) H Position (0) 1. 4:3 (for a standard screen) 2. 16:9 (for a wide screen) 16:9 aspect ratio is only sourced through the Component Video input when being fed an appropriate 16:9 aspect signal. See "Connecting a Component Video source device" on page 18 and "Obtaining a preferred projected image size" on page 12 for details. Adjusts the horizontal position of the projected image. V Position (0) Adjusts the vertical position of the projected image. -30 +30 -30 +30 Phase This function allows you to adjust the clock phase (depends on to reduce image distortion. the selected input source) H Size (0) Adjusts the horizontal width of the image. Sharpness (15) Adjusts the image to make it look sharper or softer. Operation 31