BenQ MP620P User Manual - Page 28
If you forget the password, To enter the password recall procedure, To change the password
UPC - 840046016463
View all BenQ MP620P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2. When the function is activated for the first time, Password Setup a prompt will display on the screen. Use the Up 5 or Down 6 button to select a number for Enter Password 0 0 0 0 each digit of the password. Use the Left 3 or Press Auto to Confirm Right4 button to move between the digits of Press 5 or 6 to change number the password. Press 3 or 4to move 3. When all digits are entered and the password is ready, press Auto to confirm. A confirmation message displays. • The password will display on-screen when being input. • IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 4. Perform one of the following 3 steps. i. Press Auto to continue. The set-up is finished when the message "Password setup completed" displays. ii. Press Up 5 to go back to the previous screen and re-enter four digits. iii. Press Down 6 to cancel the Password Setup Do you want to use 0 0 0 0 as your password? Yes Auto No 5 Cancel 6 password set-up and return to the on-screen menu. If you forget the password You will be asked to enter the four digit password every time you turn on the projector. If you enter the wrong password, the password error message displays. You can retry by turning off the projector (by pressing Power) and start again, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. To enter the password recall procedure Press and hold Right4 for 5 seconds. The projector will display a coded number on the screen. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector. To change the password 1. Open the on-screen menu and go to Setting > Change Password. 2. Press Left 3 or Right4. A "Password Change" message displays. 3. Enter the old password. i. If the password is correct, you can go on to enter new password. IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it. Password Keep this manual in a safe place. ii. If the password is incorrect, a "Password Error" message displays. Press Up 5 to try again or press Down 6 to cancel. 22 Operation