BenQ MX717 DLP Projector User Manual - Page 48
Function, Description, Standby, Settings, Network, Reset All, SYSTEM SETUP: Advanced menu, Monitor Out
View all BenQ MX717 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5. SYSTEM SETUP: Advanced menu Function Standby Settings Network Settings Reset All Settings Description Network Selecting On enables the function. The projector is able to provide the network function when it is in standby mode. Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 jack is correctly connected to devices. See "Connection" on page 17 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you wish to use. When you select Computer, audio signal can only be fed into the AUDIO-IN jack. When you select Video,S-Video, audio signal can only be fed into the AUDIOIN L/R jacks. There is no need to connect the audio cable when HDMI is selected since the HDMI cable carries audio signal. See "Connection" on page 17 for how to make the connection. Enabling this function slightly increases the standby power consumption. Wired LAN See "Controlling the projector through a LAN environment" on page 36 for details. AMX Device Discovery Selecting On enables the function. When AMX Device Discovery is On, the projector can be detected by AMX controller. Mac Address Displays the mac address of this projector. Returns all settings to the factory preset values. The following settings will still remain: Language, Phase, H. Size, User 1, User 2, Color Space Conversion, Projector Position, High Altitude Mode, Security Settings, Network Settings and Baud Rate. Downlo4a8ded OFrpoemraptiroonjector-manual.com BenQ Manuals