BenQ P992 User Manual - Page 2

Benq Color Monitor User’s Manual

English 2

English

FCC Class B

Radio Frequency Interference Statement

Note:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

1.

Reorient or relocate the receiving antenna.

2.

In crease the separation between the equipment and

receiver.

3.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4.

Consult the dealer or an experienced radio/television

technician for help.

Notice:

The changes or modifications not expressly approved by the

party responsible for compliance could void the user's author-

ity to operate the equipment.

Caution:

1.

If you find some parts of the monitor display discolored

due to magnetic fields generated by electrical facilities or

appliances, turn off the monitor for at least 15 minutes.

The degaussing circuit of the monitor will eliminate the

discoloration.

2.

Do not remove the monitor from its swivel base while

the power is on to prevent discoloration.

If

discoloration occurs, follow the above-mentioned

procedure for adjustment.

3.

Shielded power cord and interface cable, if any, must be

used in order to comply with the emission limits of FCC

Class B digital device.

Maintenance

Do not expose the monitor to

direct sunlight or heat.

Do not spill liquid on the moni-

tor.

Do not attempt to open the

monitor.

You may be hurt by

electric shock.

For service, call

your place of purchase.

Do not use your monitor when

magnets or electronic products

are operating nearby.

Do not use harsh chemicals or

strong cleaning solvents to clean

the monitor screen.

Wipe it

with clean, soft clothes applied

with mild solution.

Do not place anything on your

monitor.

Bad ventilation may

elevate temperature in the mon-

itor

Section	Page
1. The AC plug isolates this equipment from the AC supply.	1
2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aeroso...	1
3. Slots and openings in the cabinet and the back or bottom are provided for ventilation. They mu...	1
4. This product should be operated from the type of power indicated on the marking label. If you ...	1
5. This product should be operated with a 3-wire grounding-type plug, a plug having a third (grou...	1
6. Never push objects of any kind, or spill liquid of any kind into this product.	1
7. Do not attempt to service this product yourself, as opening or removing covers may expose you ...	1
8. Use only the proper type of power supply cord set (provided in your PC box) for this unit. It ...	1
9. The power supply cord serves as a power disconnect device for plug able equipment. The socket ...	1
1. Reorient or relocate the receiving antenna.	2
2. In crease the separation between the equipment and receiver.	2
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is...	2
4. Consult the dealer or an experienced radio/television technician for help.	2
1. If you find some parts of the monitor display discolored due to magnetic fields generated by e...	2
2. Do not remove the monitor from its swivel base while the power is on to prevent discoloration....	2
3. Shielded power cord and interface cable, if any, must be used in order to comply with the emis...	2
Do not expose the monitor to direct sunlight or heat.	2
Do not spill liquid on the monitor.	2
Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your pla...	2
Do not use your monitor when magnets or electronic products are operating nearby.	2
Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with ...	2
Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor	2
Benq Color Monitor User’s Manual	3
1. Features	3
19” shadow mask flat tube, with it’s 18” viewable size	3
Supports high refresh rates up to 85Hz at 1280x1024 resolution.	3
The On-Screen Display (OSD) allows you to adjust all settings simply with on-screen menus.	3
With DDC 2B™, it is compatible with Plug’n Play feature of Windows® XP/ ME/ 2000/ 98 and Windows®...	3
Power saving function. When the system is idle ( in off mode), the monitor automatically cuts its...	3
The monitor is packaged in recycled packing materials and no CFCs are used in the manufacturing p...	3
2. Power Management & Factory Preset Timings	3
3. Installing the Swivel Base	4
1. Place the monitor on its side. Locate the arrow and the four slots at the bottom of the monitor.	4
2. As directed by the arrow inscribed on the swivel base, insert the four pegs on the base into t...	4
3. Push the swivel base gently toward the front of the monitor until it is locked. Place the moni...	4
4. Installing the Monitor	4
1. Make sure that the system power is turned off.	4
2. Plug the signal cable into the video signal port of your computer and fix it with the two screws.	4
3. Connect the power cord to the monitor and attach it to power source.	4
4. Turn on the computer and the monitor.	4
5. Panel Key Introduction	5
1. Exit key : returns to last page, quits the menu system.	5
2. 3 / : adjusts the parameter setting to a lower value or adjusts contrast setting.	5
3. 4 / : adjusts the parameter setting to a higher value or adjusts brightness setting.	5
4. Enter key : goes into submenus or selects items.	5
5. Status Indicator	5
6. Power Switch: turns the monitor on or off.	5
6. Troubleshooting	7

BenQ P992 User Manual - Page 2

FCC Class B, Radio Frequency Interference Statement, Notice, Caution, Maintenance - manual

Page 2 highlights