BenQ SV500 SV500 User Manual - Page 19
Connection, Connecting audio/video signals
![]() |
View all BenQ SV500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connection 15 Connection Connecting audio/video signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable. • Ensure that all cables are fully inserted and firmly seated. Connecting the VGA input 1. Connect the VGA IN jack on the display to the VGA output jack on a computer using a D-Sub (15-pin) cable. 2. Connect the computer's audio output jack to the AUDIO IN jack on the display using a suitable audio cable. 3. To view images from this input, press the VGA button on the remote control. To select an appropriate audio source, see Audio menu on page 25 for details. AC SWITCH ON/OFF AC IN 100-240V~50-60Hz Audio cable Computer LINE OUT AUDIO IN VGA OUT VGA IN HDMI1 D-Sub (15-pin) cable HDMI2 DVI IN IR IN RJ-45 LAN RS232 OUT RS232 IN USB DVI OUT The audio cable is not supplied and should be purchased separately.
![](/manual_guide/products/benq-sv500-sv500-user-manual-cf7a521/19.png)