BenQ W3000 User Manual - Page 68
Advanced, System Setup : Advanced, Reset, Lamp Timer, Basic, Reset Lamp Timer, Settings
![]() |
View all BenQ W3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Resetting the lamp timer 11. After the startup logo displays, resetting the lamp timer via the OSD menu. • Under the Advanced OSD menu, go to System Setup : Advanced > Reset Lamp Timer, and select Reset. • Under the Basic OSD menu, if there's no signal connected to the projector, go to Reset Lamp Timer and select Reset; if there are signals connected, go to Settings > Reset Lamp Timer, and select Reset. Do not reset if the lamp is not new or replaced as this could cause damage. A "Reset Successfully" message displays to notify that the lamp time has been reset to "0". 68 Maintenance
![](/manual_guide/products/benq-w3000-user-manual-5120e91/68.png)
Maintenance
68
Resetting the lamp timer
11.
After the startup logo displays, resetting the lamp timer via the OSD menu.
•
Under the
Advanced
OSD menu, go to
System Setup : Advanced
>
Reset
Lamp Timer
, and select
Reset
.
•
Under the
Basic
OSD menu, if there’s no signal connected to the projector, go
to
Reset Lamp Timer
and select
Reset
; if there are signals connected, go to
Settings
>
Reset Lamp Timer
, and select
Reset
.
Do not reset if the lamp is not new or replaced as this could cause damage.
A
"Reset Successfully"
message displays to notify that the lamp time has been
reset to
"0"
.