Beretta A400 Xcel Parallel Target Kick-Off User Manual - Page 24

TRIGGER PLATE NOTICE: The trigger plate only needs to be disassembled in order to clean the ! trigger mechanism. • Engage the safety (the hammer is cocked) (Fig. 8). • Press the carrier stop push button, if it has not already been pressed (Fig. 6). • Remove the trigger guard retaining pin by pressing with a pin punch or an awl (Fig. 36). • Keeping the release button pushed all the way down, remove the trigger plate from the receiver using the trigger guard as a lever, first in the direction of the barrel and then outward (Fig. 37). EN ! BERETTA OPTIMACHOKE® HP TUBES Beretta Optimachoke® HP (High Performance) tubes are built in high resistance steel to ensure a long life and rust protection and are designed to withstand the use of steel shot. They can also shoot High Performance steel ammunitions. NOTICE: The Optima-Bore® HP barrel of the A400 Xplor can only mount Optimachoke® HP tubes. Other types of interchangeable Beretta choke tubes are not appropriate for use with Optima-Bore® HP barrels and these will alter the shot pattern distribution. 26