Beretta ARX160 22LR Pistol Instruction Manual - Page 19

Notice, Fig. 9 and 10, Fig. 1a, Fig. 11, Fig. 12, Fig. 13 - . pistol

Get Beretta ARX160 22LR Pistol PDF manuals and user guides View all Beretta ARX160 22LR Pistol manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Notice: It is advisable to carry out the field stripping operations over a table to catch components should they drop. WARNING: NEVER DO ANYTHING BEYOND WHAT YOU ARE SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL. NEVER ALTER OR MODIFY THE PARTS IN YOUR FIREARM. WARNING: ALWAYS WEAR EYE PROTECTION THAT IS SPECIFIED FOR USE WITH FIREARMS, EVERY TIME YOU HANDLE YOUR FIREARM FOR CLEANING AND MAINTENANCE. To disassemble your ARX 160 .22LR first ensure it is unloaded, with the chamber empty. Insert an empty magazine and pull the bolt to the rear by the bolt handle to lock the bolt in the open position. Then: • Remove the magazine. • Close the bolt pulling the bolt handle rearward and releasing it. • Fold the stock or the end cap to the right side of the firearm (Fig. 9 and 10). • Grasp the firearm with one hand on the upper receiver and with the other hand on the pistol grip. • Turn the safety selector to the DISASSEMBLE position. This is done by rotating the safety selector past the SAFE position. Selector must be held in the DISASSEMBLE position during disassembly as it is spring loaded. (Fig. 1a) • Press the guide rod block in and pull the pistol grip away from the upper receiver to separate them. (Fig. 11). • Let the guide rod block slide out of the upper receiver. • To separate the bolt group from the receiver you first have to take out the bolt handle (Fig. 12). • Since there is no longer tension on the mainspring, the bolt handle is unlocked and you simply have to extract it from the bolt. Now you will be able to slide the complete bolt group out of the rifle/pistol (Fig. 13). 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Notice:
It is advisable to carry out the field stripping operations
over a table to catch components should they drop.
WARNING:
NEVER DO ANYTHING BEYOND WHAT YOU ARE
SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL.
NEVER ALTER OR MODIFY THE PARTS IN YOUR FIREARM.
WARNING:
ALWAYS WEAR EYE PROTECTION THAT IS
SPECIFIED FOR USE WITH FIREARMS, EVERY TIME YOU
HANDLE
YOUR
FIREARM
FOR
CLEANING
AND
MAINTENANCE.
To disassemble your ARX 160 .22LR first ensure it is unloaded,
with the chamber empty. Insert an empty magazine and pull
the bolt to the rear by the bolt handle to lock the bolt in the open
position. Then:
• Remove the magazine.
• Close the bolt pulling the bolt handle rearward and releasing
it.
• Fold the stock or the end cap to the right side of the firearm
(
Fig. 9 and 10
).
• Grasp the firearm with one hand on the upper receiver and
with the other hand on the pistol grip.
• Turn the safety selector to the DISASSEMBLE position. This
is done by rotating the safety selector past the SAFE position.
Selector must be held in the DISASSEMBLE position during
disassembly as it is spring loaded. (
Fig. 1a
)
• Press the guide rod block in and pull the pistol grip away
from the upper receiver to separate them. (
Fig. 11
).
• Let the guide rod block slide out of the upper receiver.
• To separate the bolt group from the receiver you first have to
take out the bolt handle (
Fig. 12
).
• Since there is no longer tension on the mainspring, the bolt
handle is unlocked and you simply have to extract it from the
bolt. Now you will be able to slide the complete bolt group
out of the rifle/pistol (
Fig. 13
).
19