Beretta ARX160 22LR Pistol Instruction Manual - Page 22
Dry Firing/dummy Rounds
View all Beretta ARX160 22LR Pistol manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HV(High Velocity) amunition. Beretta suggests that you try several boxes of a recommended brand/type of amunition in your ARX 160 .22LR before you put it into regular use to determine reliability of ignition and performance of your amunition. If issues occur, try different recommended brands until a reliable load is found. Based on our testing and evaluation, Beretta recommends the following ammunition for optimal performance: - Federal American Eagle - CCI Standard - CCI Stinger - CCI MiniMag - RWS R100 - RWS R50 Other .22LR ammunition may also work well but should be evaluated for function and performance. Notice: You should clean the barrel bore every 200-300 rounds with an appropriate firearm cleaning lead solvent to prevent lead build up which can lead to innacuracy and poor functioning. WARNING: Carefully inspect each cartridge before it is loaded in the magazine. Be certain the cartridge cases are not split, deformed, or the cartridges do not possess any other dents or defects. Do not fire old ammunition in this firearm. Primers, powder, cartridge cases, and bullets can deteriorate with time and cause damage to the firearm, or injury to the shooter or others. WARNING: Do not use non-standard, or "remanufactured," or hand-loaded (reloaded) ammunition, or cartridges other than those for which the firearm was originally chambered. Beretta assumes no liability for incidents occurring through the use of non-standard or incorrect ammunition. Use of reloaded or incorrect ammunition will void the manufacturer's warranty. DRY FIRING/"DUMMY" ROUNDS Dry firing is defined as firing a firearm with no ammunition in the 22