Bernina Artista 630 User Guide - Page 21
Feed Dog and Fabric Feed with Height Compensating Tool, Feed Dog and Sewing Corners
View all Bernina Artista 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Feed Dog and Fabric Feed with Height Compensating Tool The feed dog works accurately when the foot is level. Operating instructions 21 If the foot is at an angle, e.g. when sewing over thick to thin or vice-versa, the feed dog cannot grip and feed the fabric and the fabric might jam. Uneven layers To solve this problem, place one, two or three 1 compensating plates as required behind the needle under the presser foot to level it. To correct the height in front of the foot, place one or more plates to the right of the foot close to the needle. Sew until the foot is level again and remove the plates. Feed Dog and Sewing Corners The space between the two rows of feed dogs is relatively large due to the width of the stitch plate hole. When sewing corners only a small section of the fabric is actually on the feed dog, so that it cannot grip the fabric well. Correct this by placing one or more compensating plates as close as possible to the edge of the fabric. 031196.50.04_0507_a630_EN