Binatone Eclipse BT User Manual - Page 11
The handset will give a double beep when
![]() |
View all Binatone Eclipse BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2.3 Installing and Charging the Rechargeable Batteries in an Additional Handset 1) Insert the 2 supplied batteries into the battery compartment, observing the correct polarity (see markings inside battery compartment). Warning: Use only the supplied NiMH rechargeable batteries. 2) Place the back cover over the back of the handset and press down until it clicks into place. 3) Place the handset on the charging pod and charge for 15 hours before using the handset for the first time. • The handset will give a double beep when it is properly placed on the charging pod and the battery charging indicator on the charging pod lights up to indicate charging. 2.4 Removing the back cover of the Main Eclipse Handset Insert the supplied key into the groove as indicated in the illustration and twist it clockwise to release the back cover. If you have a broadband line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line; otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters contact your broadband supplier. 9
![](/manual_guide/products/binatone-idect-eclipse-plus-user-manual-cc8bd87/11.png)