Binatone Eclipse BT User Manual - Page 29
All the registered handsets that are in range will start to ring., When first turned on, the display
![]() |
View all Binatone Eclipse BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.6 Mute/Unmute the Microphone When the microphone is muted, the handset displays MUTE ON, and your caller cannot hear you. m m During a call, press (Main Eclipse handset) or press (additional handsets) to turn on/off the microphone. 4.7 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. 1. Press the key under the base unit. • All the registered handsets that are in range will start to ring. You can stop the paging by pressing any key on a handset or the key under the base unit again. 4.8 Switching the Handset On/Off O O Press and hold on your main Eclipse Handset or press on the additional handsets for more than 2 seconds to switch the handset on or off in standby mode. • When first turned on, the display shows SEARCHING... until the handset finds the base. Note: You can switch the handset off to save battery life, if the handset is not on the base or a charging pod and you do not want to use it for a while. IMPORTANT: When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring when there is an incoming call. To answer a call, you will need to switch it back on and it may take some time for the handset to re-establish a radio link with the base unit. 27
![](/manual_guide/products/binatone-idect-eclipse-plus-user-manual-cc8bd87/29.png)