Binatone Eclipse BT User Manual - Page 85

"When I press on the keys, nothing happens" Make sure that the batteries are fitted in your handset. If the Battery Level symbol on the display shows 'low', put your handset back on the base unit or charging pod to charge. "When I key in a number, it appears on the display, but I cannot make an external call" Try a different position for the base unit - somewhere higher if possible, or further away from other electrical equipment. "The phone does not ring" Check that the base unit's mains power adapter is plugged in and power is switched on. The base unit needs mains power for normal operation of the phone - not just for charging the batteries. Make sure that you are using the telephone line cable that was supplied with your phone. Make sure that the ringer volume settings are not set to off. Increase the ringer volume settings. (See Set the Ring Volume on page 55.) "My call was cut off when I went out of range. Now I can't use my handset." Move the handset closer to the base unit before you try to make a call again. "There is interference and noise on the line" Move the handset closer to the base unit, or to a different position. Try moving the base unit away from other electrical equipment, such as a television or a computer. You'll get the best reception if you place the base unit as high as possible. For example, in a two-floor building, the first-floor landing is an ideal place. "I hear 'beeps' from my handset while I'm on a call" You may be moving out of range of the base unit. Move closer or your call may be cut off. Check the Battery Level symbol on the display. If it's low, recharge the batteries. 83