Biostar A785G3 Bios Setup - Page 34
Channel Interleaving, Enable Clock to All DIMMs, MemClk Tristate C3/ATLVID, Memory Hole Remapping,
View all Biostar A785G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
A785G3/A780L3/A780L3G BIOS Manual Channel Interleaving T his item allows you to control the DDR2 dual-channel function. Options: XOR of Address bits [20:16, 6] (Default) / XOR of Address bits [20:16, 9] / Address bits 6 / Address bits 12 / Disabled Enable Clock to All DIMMs T his item determines whether the BIOS should actively reduce EMI (Electromagn etic Interference) and reduce power consumption by turning off unoccupied or inactive DIMM slots. Options: Disabled (Default) / Enabled MemClk Tristate C3/ATLVID T his item enables or disables the MemClk T ristate function in C3 Mode. Options: Disabled (Default) / Enabled Memory Hole Remapping T his item allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Only 64-bit OS supports this function. Options: Enabled (Default) / Disabled DCT Unganged Mode T his item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2) dual-chann el operation mode. If two DRAM modules with different size are installed, using unganged mode can still make it run in dual-channel operation. Options: Always (Default) / Auto Power Down Enable T his item controls the DRAM power down function. Options: Enabled (Default) / Disabled Page Smashing T his item is S/W Control of Page Smashing Mechanism. Options: Disabled (Default) / IC / DC / Both 33