Biostar M7SXD M7SXD user's manual - Page 56

USB Controller, USB Keyboard Support, IDE HDD Block Mode, Init Display First, AGP Auto Calibration

Get Biostar M7SXD PDF manuals and user guides View all Biostar M7SXD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Chapter 2 BIOS Setup USB Controller This option should be enabled if your system has a USB installed on the system board. You will need to disable this feature if you add a higher performance controller. The Choices: Enabled (default), Disabled. USB Keyboard Support Enables support for USB attached keyboards. The Choices: Disabled (default), Enabled. IDE HDD Block Mode Block mode is otherwise known as block transfer, multiple commands, or multiple sector read/write. Select the "Enabled" option if your IDE hard drive supports block mode (most new drives do). The system will automatically determine the optimal number of blocks to read and write per sector. The Choices: Enabled (default), Disabled. Init Display First With systems that have multiple video cards, this option determines whether the primary display uses a PCI Slot or an AGP Slot. The Choices: PCI Slot (default), AGP. AGP Auto Calibration This item allows you enable/disable AGP Auto Calibration. The Choices: Enabled (default), Disabled. IDE Access Interface This item allows you select the IDE Access Interface. The Choices: Auto (default), Embedded Bus, PCI Bus. MAC Access Interface This item allows you select the MAC Access Interface. The Choices: Embedded Bus (default), PCI Bus. 2-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Chapter 2
BIOS Setup
2-19
USB Controller
This option should be enabled if your system has a USB installed on the system
board. You will need to disable this feature if you add a higher performance
controller.
The Choices: Enabled
(default), Disabled.
USB Keyboard Support
Enables support for USB attached keyboards.
The Choices: Disabled
(default),
Enabled.
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple commands, or multiple
sector read/write. Select the “Enabled” option if your IDE hard drive supports block
mode (most new drives do).
The system will automatically determine the optimal
number of blocks to read and write per sector.
The Choices: Enabled
(default), Disabled.
Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI Slot or an AGP Slot.
The Choices: PCI Slot
(default), AGP.
AGP Auto Calibration
This item allows you enable/disable AGP Auto Calibration.
The Choices: Enabled
(default), Disabled.
IDE Access Interface
This item allows you select the IDE Access Interface.
The Choices: Auto
(default), Embedded Bus, PCI Bus.
MAC Access Interface
This item allows you select the MAC Access Interface.
The Choices: Embedded Bus
(default), PCI Bus.