Biostar M7VIG D M7VIG-D user's manual - Page 7
DDR DIMM Modules: DDR1-2 - memory
View all Biostar M7VIG D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
MMootthheerrbbooaarrdd DDeessccrriippttiioonn DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered DDR 200/266MHz (without ECC) Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB/512MB/1GB *1 2GB * The list shown above for DRAM configuration is only for reference. How to install a DIMM Module 1. The DIMM socket has a " Plastic Safety Tab", and the DIMM memory module has an "Asymmetrical notch", so the DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the DIMM memory modules into the socket at a 90-degree angle, then push down vertically so that it will fit into the place. 3. The Mounting Holes and plastic tabs should fit over the edge and hold the DIMM memory modules in place. 5