Biostar M7VIG M7VIG compatibility test report - Page 57
Vcore Ripple TestOpen up the DOS Editor
View all Biostar M7VIG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
CPU CH1 Condition Vcore Ripple Test(Open up the DOS Editor) Athlon XP 2000+ M\B VIG/0.90 STP CLK CH3 Vcore 1.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 2.At the main menu ,type "U" to go to the "Utilities Submenu" 3.At the next menu , type "B" to "Enable Stop Clock Throttling" 1.At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 2.Press tiwce and then "Y" to exit the stpclk.bat program. 3.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a Pop-up menu. 7.Measure the Vcore waveform Vcore Transient waveform RESULT PASS 57
57
Vcore Ripple Test(Open up the DOS Editor)
CPU
Athlon
XP
2000+
M\B
VIG/0.90
CH1
STP CLK
CH3
Vcore
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
1.At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
2.Press <ESC> tiwce and then “Y” to exit the stpclk.bat program.
3.Type “EDIT” to enter the “EDIT” pragram. Press “Alt+F” to open up a
Pop-up menu.
7.Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS