Biostar M7VIZ M7VIZ user's manual - Page 13
Serial ATA Connector: JSATA1/ JSATA2 only support
View all Biostar M7VIZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Clear CMOS Jumper: JCMOS1 JCMOS1 Assignment 3 Normal Operation (default) 1 Pin 1-2 Close 3 Clear CMOS Data 1 Pin 2-3 Close ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data. Case Open Connector: JCI1 1 Pin Assignment 1 Case Open Signal JCI1 2 Ground Serial ATA Connector: JSATA1/ JSATA2 (only support with South Bridge VT8237) Pin Assignment Pin 65 32 1 Ground 2 3 TX- 4 741 5 RX- 6 JSATA1/ JSATA2 7 Ground CD-ROM Audio-In Header: JCDIN1 Assignment TX+ Ground RX+ 1 4 JCDIN1 Pin Assignment 1 Left Channel Input 2 Ground 3 Ground 4 Right Channel Input 10
10
Clear CMOS Jumper: JCMOS1
JCMOS1
Assignment
3
1
Pin 1-2 Close
Normal Operation (default)
3
1
Pin 2-3 Close
Clear CMOS Data
※
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 Close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 Close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
Case Open Connector: JCI1
Pin
Assignment
1
Case Open Signal
1
JCI1
2
Ground
Serial ATA Connector: JSATA1/ JSATA2 (only support with
South Bridge VT8237)
Pin
Assignment
Pin
Assignment
1
Ground
2
TX+
3
TX-
4
Ground
5
RX-
6
RX+
1
2
3
4
5
6
7
JSATA1/ JSATA2
7
Ground
CD-ROM Audio-In Header: JCDIN1
Pin
Assignment
1
Left Channel Input
2
Ground
3
Ground
1
4
JCDIN1
4
Right Channel Input