Biostar MCP6P-M2 Setup Manual - Page 18
Biostar MCP6P-M2 Manual
View all Biostar MCP6P-M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Motherboard Manual JSPDIF_O UT1: Digital Audio-out Conne ctor This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 Assignment +5V SPDIF_OUT Ground 1 3 JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Proce dures: 1. 2. 3. 4. 5. 6. Remov e AC power line. Set the jumper to "Pin 2-3 close". Wait f or f ive seconds. Set the jumper to "Pin 1-2 close". Power on the AC. Reset y our desired password or clear the CMOS data. 18
Motherboard Manual
18
JSPDIF_OUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
Assignment
1
+5V
2
SPDIF_OUT
1
3
3
Ground
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
1
3
1
3
Pin 2-3 Close:
Clear CMOS data.
※
Clear CMOS Procedures:
1.
Remov e AC power line.
2.
Set the jumper to “Pin 2-3 close”.
3.
Wait f or f ive seconds.
4.
Set the jumper to “Pin 1-2 close”.
5.
Power on the AC.
6.
Reset y our desired password or clear the CMOS data.