Bissell CleanView Helix Vacuum User Guide - English - Page 6

Operation Handle position Press the handle release pedal with your foot to place your Cleanview Helix into one of three cleaning positions. 1. Upright For storage and above floor cleaning with tools. 2. Normal cleaning 3. Low cleaning Press handle release pedal once. Use for most household floor cleaning tasks. With the vacuum in normal cleaning position, press handle release pedal again, use for reaching under low furniture such as tables, chairs or beds. Height adjustment The Powerfoot/Rotating floor brush can be adjusted to clean several floor surfaces. NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. caution: Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular, pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. 1. Place handle in upright position. 2. Turn height adjustment knob to desired setting. Lowest Setting For bare floors. Medium Settings For short and medium pile carpets. Highest Setting For plush pile carpet. 3. Place the handle in the normal cleaning position and the Powerfoot will adjust to the setting chosen. NOTE: You may also adjust the setting while in the normal cleaning position. 6 www.bissell.com Tip: Hair, string and small objects can block the vacuum hose or tools. Check them occasionally for obstructions. Tip: Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose. Tip: Your vacuum features a Quick Release cord wrap. To remove the power cord quickly and easily, rotate the upper cord wrap towards floor, and slip power cord from upper and lower cord wraps. 800.237.7691