Bissell CrossWave HF3 Cordless Multi-Surface Wet Dry Vac 3649A User Guide - Page 5

Cleaning Your Floors Go to support.BISSELL.com for how-to videos and cleaning tips. 1. Recline the machine. Press the power button ON. Note: The unit must be reclined before power button will activate. 2. Press the WATER FLOW button to switch between LO and HI Modes. LO Mode: Blue light solid HI Mode: Blue light solid 3. Solution will dispense automatically. Make forward and backward passes to clean your floors. 4. The dirty water tank indicator will flash red when tank is full or removed. 5. Turn the machine OFF by pressing the power button and return machine to the upright position. Cleaning with Hard Floor Sanitize Formula Please read "DIRECTIONS FOR USE" on Hard Floor Sanitize label. Use on hard nonporous floors only. 1. Remove visible soil before cleaning. In HI Mode, make forward and backward passes. 2. Allow floor to remain visibly wet with formula for five minutes. This may require additional passes in HI mode. 3. In HI Mode, make forward and backward passes to extract formula. ATTENTION • This machine is designed to be used on sealed hard floors. • Do not overwet hardwood floors. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. BISSELL.com 5