Bissell OptiClean™ Multi Cyclonic Pet User Guide - Page 12

Maintenance and care Thermal motor protection An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. If this happens, proceed as follows. 1. Turn the cleaner OFF and unplug from electrical outlet. 2. Check the cleaner for the source of overheating problem (i.e. full dirt cup, dirty filters or clog). 3. Follow the steps for checking filters and clearing clogs on pages 10 and 11. 4. When the motor cools for approximately 30 minutes, the thermal protector automatically resets and cleaning may continue. If the cleaner will not turn on or the thermal protector continues to activate, your cleaner may need servicing. Call BISSELL Consumer Services or visit the website to locate an authorized Service Center. Note: The thermal protector controls the main vacuum motor only, not the brush motor. If the thermal protector activates, the brush will continue to operate normally; however, there will be no suction. 12 www.bissell.com 800.237.7691