Bissell OptiClean™ Multi Cyclonic Pet User Guide - Page 15

TurboBrush Tool maintenance

Get Bissell OptiClean™ Multi Cyclonic Pet PDF manuals and user guides View all Bissell OptiClean™ Multi Cyclonic Pet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Maintenance and care TurboBrush Tool maintenance The TurboBrush Tool should be checked regularly for clogs or debris wrapping around the brush. Note: Model 30C7T comes with the Pet TurboBrush Tool and follows same maintenance instructions. 1. Remove tool from hose or from vacuum. 2. 2. Twist collar so opening is at the top and lift top cover to remove. 3. Remove the brush from the belt and clean debris. 4. Replace the brush inside the belt and 4. place ends into slots on sides. 5. Reposition top cover making sure to line up inside tab at the front with the opening on the cover. Twist collar until opening is at the bottom to lock into place. 5. www.bissell.com Tip: TurboBrush® may not be turning due to loss of suction. Refer to pg. 11 for checking and cleaning clogs. 15 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
www.bissell.com
800.237.7691
15
M
aintenance and care
TurboBrush Tool maintenance
The TurboBrush Tool should be
checked regularly for clogs or
debris wrapping around the brush.
Note: Model 30C7T comes with
the Pet TurboBrush Tool and
follows same maintenance
instructions.
1.
Remove tool from hose or from vacuum.
2.
Twist collar so opening is at the top and
lift top cover to remove.
3.
Remove the brush from the belt and clean
debris.
4.
Replace the brush inside the belt and
place ends into slots on sides.
5.
Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover.
Twist collar until opening is
at the bottom to lock into place.
2.
4.
5.
Tip:
TurboBrush
®
may not be turning
due to loss of suction. Refer to
pg. 11 for checking and clean-
ing clogs.