Bissell Pet Hair Eraser® Cyclonic Canister Vacuum 66T6 User's Guide - Page 11
Replacing the post-motor HEPA media filter, Replacing the dirt cup HEPA media filter & cleaning
View all Bissell Pet Hair Eraser® Cyclonic Canister Vacuum 66T6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Maintenance and care Replacing the post-motor HEPA media filter The post-motor HEPA media filter assists in the filtration process to return clean air to 2. the room. 1. Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet. 2. Remove the filter door (located on the back of the vacuum) by pulling down on the filter door and pulling it toward you. 3. Remove the post-motor HEPA media filter by 3. grasping the lip of the filter frame and pulling out toward you. 4. Replace the post-motor HEPA media filter with a new filter. NOTE: The post-motor filter is a white, pleated HEPA media filter. This filter is NOT Post-Motor HEPA Media Filter washable and must be replaced when it becomes dirty. 5. Replace the filter door by inserting the two tabs at the bottom of the filter door, pushing down on the bottom of the filter door and pushing it back into the vacuum. Be sure the top tabs are secured. Replacing the dirt cup HEPA media filter & cleaning the foam filter IMPORTANT: Make sure the dirt cup is empty before you replace or clean these 1. filters. 1. To remove the dirt cup HEPA media filter, pull down on the front snap. 2. Remove and replace as necessary. NOTE: The dirt cup HEPA media filter is a white, pleated HEPA media filter. This filter is NOT washable and must be replaced when it becomes dirty. www.bissell.com 800.237.7691 161