Bissell Pet Hair Eraser® Cyclonic Canister Vacuum 66T6 User's Guide - Page 13

Troubleshooting Vacuum cleaner won't run Possible causes 1. Vacuum cleaner is not plugged in 2. Power button is not pressed down WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Check electrical plug 2. Press power button down Vacuum cleaner won't pick up or low suction Possible causes Remedies 1. Tools, flex hose and/or telescoping extension wand are blocked 1. Remove each part and check for blockages 2. Filters are dirty 2. Check and clean or replace all filters 3. Dirt cup is full 3. Empty dirt cup 4. Swivel hose not securely attached to suction opening 4. Make sure swivel hose is locked into suction opening 5. Crack or hole in flex hose 5. Check hose and replace if needed 6. Air flow regulator or variable suction power control is set to open or minimum setting 6. Change to closed or maximum setting Visible dust escaping from vacuum Possible causes Remedies 1. Dirt cup is full 1. Empty dirt cup 2. Filters missing or installed incorrectly 2. Check all filters for correct installation 3. Filters are dirty 3. Check and clean or replace all filters 4. Flex hose is blocked 4. Remove hose and check for blockages 5. Swivel hose not securely attached to suction opening 5. Make sure swivel hose is locked into suction opening 6. Crack or hole in flex hose 6. Check hose and replace if needed Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, please contact BISSELL Consumer Services at 1-800-237-7691. www.bissell.com 800.237.7691 163