Bissell Pet Hair Eraser® Cyclonic Canister Vacuum 66T6 User's Guide - Page 8

Operations Variable suction power control The variable suction power control is located on the back of the vacuum. Turn the control toward the larger dots for maximum suction. Turn the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics. Air flow regulator Open the air flow regulator by sliding the regulator back towards the handle to an open position to reduce suction for delicate fabrics. Close the air flow regulator by sliding the regulator down to the closed position for full suction. Clean filter indicator The clean filter indicator is located between the power button and the automatic cord rewind button. It will monitor your air flow and let you know when it is time to clean or replace your filters. If the indicator turns orange while you are vacuuming, your filters need to be cleaned or replaced. If the indicator remains orange, even after cleaning or replacing your filters, turn the vacuum off and check for a clog in the hose or tools. Note: The indicator may turn orange when using the tools due to the restricted airflow. This does not necessarily mean that the filters need to be cleaned or replaced. If the indicator does not turn off once the tool is removed, check for a clog in the hose/tools or clean or replace your filters. Clean Filter Indicator 186 w w w . b i s s e l l . c o m 800.237.7691