Bissell Pet Hair Eraser Lithium Ion Cordless Pet Hand Vacuum 2390 User Guide - Page 10

Disposal of Batteries WARNING This product contains Lithium Ion rechargeable batteries. According to Federal and State regulations, removal and proper disposal of Lithium Ion batteries is required. For removal of the batteries in your Pet Hair Eraser Lithium Ion, see instructions on this page. NOTICE: Disconnecting the battery will destroy the appliance and invalidate the warranty. Before proceeding, ensure that: -the unit is disconnected from the charger -the dirt collection tank and motorized brush have been removed from unit (see removal instructions on pages 8-9) -you have a flat head and Phillips screwdriver, required for disassembly 1 2 Unplug charger and remove the dirt collection tank. Using a flathead screwdriver, pry off top cover of handle. 3 4 Using a flathead screwdriver, pry off left and right panels from hand vacuum. Using a flathead screwdriver, remove the plastic vent cover. 5 6 Using a Phillips screwdriver, remove (7) seven screws in the locations referenced in the image. Disconnect and remove entire battery assembly by cutting wires from PCB and wrapping wire ends with insulation tape. Discard remainder of product. NOTE: Keep Battery Pack together - DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.Call2Recycle.org. 10 www.BISSELL.com