Bissell PowerForce Helix Turbo Rewind Upright Vacuum 1797 User Guide - Page 5

Assembly WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures. 1 2 3 Place the upper handle onto the base and push it down. Then attach the handle with the 2 screws that are taped to the handle in a plastic bag. Next, insert the wand base and turn it to the left to lock it into place. Next, insert the end of the hose into the back of the vacuum and twist to lock it into place. 4 Now wrap the 5 hose through the hose clip and connect the hose wand to the foot 6 Open the dirt container lid by lifting the release latch on the front. hose down at the bottom of the vacuum. This unit includes a Febreze® filter. To replace the filter, press the tank release button and pull handle to lift dirt container away from vacuum. 7 Put your accessory tools on the vacuum and you're ready to go! Remove filter in unit and replace with Febreze® filter. Return dirt tank back onto vacuum. Extension Wand (with Crevice Tool inside) Dusting Brush TurboBrush® Tool NOTE: The Febreze® filter must first be removed from the bag before inserting it into the machine. NOTE: The crevice tool can be found inside the extension wand. You can remove it to use it and put it back to store it neatly out of your way when you're finished. Febreze® and related trademarks are owned by The Procter & Gamble Company, Cincinnati, Ohio and used under license by BISSELL Homecare, Inc. www.BISSELL.com 5