Bissell PowerForce Helix Turbo Rewind Upright Vacuum 1797 User Guide - Page 8
Cleaning the Pre-Motor Filter, Emptying the Dirt Container, Cleaning the Post-Motor Filter
View all Bissell PowerForce Helix Turbo Rewind Upright Vacuum 1797 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Emptying the Dirt Container 1 2 Press the tank release button and pull handle to lift dirt container away from vacuum. Cleaning the Pre-Motor Filter 1 2 3 Press the tank release button and pull handle to lift dirt container away from vacuum. Open the dirt container lid by lifting the release latch on the front. Holding dirt container over a trash bin, press release button on back to open tank bottom and dump the debris. Snap bottom back into place when empty. Remove the premotor filter by pulling it from the tank lid. Clean it with warm water. Allow to completely dry before returning it back into the dirt container lid. Cleaning the Post-Motor Filter 1 2 With dirt container removed, press filter cover release button to access post-motor filter. Clean all filters with mild detergent, rinse, and squeeze all excess water. Allow filters to dry completely before reinserting. WARNING To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate the vacuum with damp or wet filters, without filters in place or with the dirt container missing. Allow components to dry before reassembling the Dirt Container. 8 www.BISSELL.com