Bissell ProHeat 2X Lift-Off Upright Carpet Cleaner 1565 User Guide - Page 12

Maintenance: Cleaning Machine After Use WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 1 To clean machine before storing it, fill the Formula & Water Tank with hot tap water only, in order to flush out any residual formula Turn unit on, press and hold the trigger for 15 seconds while making back and forth passes 2 Spray Tips Remove the screw that is within the clear plastic Screw 2 Spray Tips Screw 1 Screw 3 Spray Tip Release trigger and suction up all of the water Two Covers Remove the pod from the base. Press the tabs on the black ends of the spray tips to remove and rinse off before returning them to the base Unscrew three screws with a Phillips screwdriver from the clear Brush Rolls covers Before replacing clear cover, inspect the Brush Rolls and remove any debris 3 Pivot into place Insert Tabs into slots Wipe out the end caps with a clean paper towel 12 www.BISSELL.com Rinse and replace clear Brush Covers, carefully aligning top cover tabs along front slots of bottom cover