Bissell ProHeat 2X Lift-Off Upright Carpet Cleaner 1565 User Guide - Page 9

Clean Carpet: Upright Mode 1 2 Power Button Plug into a properly grounded outlet Indicator light turns on when unit is plugged in, power switch is pushed and Pod is seated correctly. 3 5 After confirming Formula & Water Tank is filled properly, press the power button, located on the Cord Wrap side "Click" "Click" If light doesn't turn on, reseat Pod Listen for two clicks 4 Recline Pedal Press recline pedal to release handle. 2X Formula Press the trigger to apply solution. Slowly make 2 wet passes, one forward and one back. Release the trigger to recover the dirty solution by slowly making 2 dry passes, one forward and one back. Press trigger to apply solution. Slowly make 3 wet passes, one forward, one back and one more forward. Release the trigger to recover the dirty solution by slowly making a final dry pass back. NOTE: The ProHeat 2X® Lift-Off® Deep Cleaner may be equipped with a circuit breaker that automatically shuts off the brush if a large or loose object catches in the brush roll. If that occurs, unplug your machine, remove the foreign object, and plug the unit back in to reset circuit breaker. ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. www.BISSELL.com 9