Bissell ProHeat 2X Pet Carpet Cleaner 9200P User Guide - Page 12

Operations Cleaning with attachments Your PROheat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. a. Check manufacturer's tag before cleaning. "W" or "WS" on the tag means you can use your PROheat 2X. If the tag is coded with an "X" or an "S" (with a diagonal stripe through it), or says "Dry Clean Only", do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer's tag is missing or not coded, check with your furniture dealer. b. Check for colorfastness in an inconspicuous place. c. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. d. Plan activities to allow upholstery time to dry. e. Pick up any loose dirt, debris and pet hair before deep cleaning. 2. Follow the instructions on pages 9-10 for filling the 2-in-1 water tank and the formula tank. 3. Set ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose. 4. Set Custom Clean dial for heavy traffic, normal clean, light clean, or water rinse as desired. Manufacturer's tag 5. 5. Attach the cleaning tool to the end of the hose. 6. Plug in and turn on the power switch and heater (if desired). 7. Clean by pressing the trigger to spray WARNING: solution onto the area to be cleaned. Slowly move the tool back and forth over To reduce the the soiled surface. Release the trigger to risk of injury, be extra careful when suction soiled water. Continue to clean in cleaning stairs. Make sure machine is the area, working in small sections, until no secure and level. more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. 12 www.bissell.com 800.237.7691