Bissell ProHeat 2X Pet Carpet Cleaner 9200P User Guide - Page 18

Machine care continued, Small belt removal and replacement

Page 18 highlights

Maintenance and care Machine care continued 6. The inside of the end caps by the brush rolls can be wiped out with a clean paper towel, or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning. 7. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions on pages 18 & 19 for removal and replacement of the brush rolls and belts. WARNING: To reduce the risk of fire, electric shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 8. To clean attachments that may have been used, remove from hose and rinse under clean, running water. Dry and replace attachment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to page 13. 9. After carpet is dry, vacuum with a sepcialized dry vacuum to remove hair and fuzz. Small belt removal and replacement Occasional replacement of one or both belts may become necessary. 3. If that is needed, please follow the instructions below. 1. Turn off the machine, and unplug it from the outlet. 2. Remove both the 2-in-1 water tank and 4. the formula tank. Set aside. 3. Unscrew the front nozzle and remove it. Set aside. 4. Turn the machine on its side. IMPORTANT: cord side down. 6. 5. Remove the clear end cap by unscrewing the 2 black screws. Take care not to drop the screws into the unit. 6. Remove 1 silver screw. 7. Remove pivot arm by gently lifting up. 8. 8. Remove small brush belt. 9. Replace small brush belt, and reverse steps above. 18 www.bissell.com 5. 7. 9. 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

www.bissell.com
800.237.7691
M
aintenance and care
18
Machine care continued
6.
The inside of the end caps by the brush
rolls can be wiped out with a clean paper
towel, or, if a more thorough cleaning is
desired, the end caps can be taken off
using a Phillips head
screwdriver and
rinsed clean. Replace after cleaning.
7.
Any loose hair or debris can be pulled from
the brush rolls and thrown away. For the
most thorough clean before storage, follow
directions on pages 18 & 19 for removal
and replacement of the brush rolls and belts.
8.
To clean attachments that may have been
used, remove from hose and rinse under
clean, running water. Dry and replace
attachment in the tool caddy. Clean the
hose by suctioning clean water from the tap.
Before replacing, lift end of hose and stretch
out to ensure all water is cleared from hose.
Refer to page 13.
9.
After carpet is dry, vacuum with a sep-
cialized dry vacuum to remove hair and
fuzz.
Occasional replacement of one or
both belts may become necessary.
If that is needed, please follow the
instructions below.
1.
Turn off the machine, and unplug it from
the outlet.
2.
Remove both the 2-in-1 water tank and
the formula tank. Set aside.
3.
Unscrew the front nozzle and remove it.
Set aside.
4.
Turn the machine on its side.
IMPORTANT: cord side down.
5.
Remove the clear end cap by unscrew-
ing the 2 black screws. Take care not to
drop the screws into the unit.
6.
Remove 1 silver screw.
7.
Remove pivot arm by gently lifting up.
8.
Remove small brush belt.
9.
Replace small brush belt, and reverse
steps above.
3.
5.
4.
7.
9.
6.
8.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Small belt removal and replacement