Bissell ProHeat 2X Pet Carpet Cleaner 9200P User Guide - Page 13
Deep reach tool attachment, Cleaning with attachments continued
View all Bissell ProHeat 2X Pet Carpet Cleaner 9200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Operations Cleaning with attachments continued 8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. 9. It is recommended that you suction clean 10. water from a bowl to rinse out the hose. 10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. Coil flex hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the instructions on page 11. 13. Return ReadyTools dial to floor setting. Deep reach tool attachment (Select models only) 1. Follow the instructions on page 9 for filling the 2-in-1 water tank and the formula tank. 3. 2. Follow instructions 3-6 on page 12 under "Cleaning with attachments". 3. Set tool on stain and press the trigger to spray solution onto the area to be cleaned. 4. Slowly move the tool back and forth 5. over the soiled surface, keeping the tool in contact with the carpet. 5. Release trigger and move tool slowly over the soiled area to suction up water and dirt. 7. 6. Continue to clean the area, working in small sections, until no more dirt can be removed. 7. Remove tool from hose when finished. Clean under warm water before storing. www.bissell.com 13 800.237.7691