Bissell ReadyClean Deep Cleaner 40N7 User Guide - Page 5

Assembly Your deep cleaner assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver. 1. Slide upper body onto lower body. 1. 2. Secure with screws. 3. Slide upper handle into upper body by aligning the pin and sliding into place. NOTE: Be sure to secure upper handle before lifting. Rotate handle lock clockwise to secure. 4. Place solution tank on back of unit. 5. Wrap power cord. Assembly is now complete. 3. WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. 2. 4. Operations pin Before you clean 1. Move furniture to another area if cleaning an entire room. (Optional) 2. Vacuum carpet thoroughly. 3. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 4. Pre-Treating (optional) Pre-treat stubborn stains and highly soiled carpet in hallways and other high-traffic areas. a. Generously spray BISSELL Pretreat evenly over soiled area. Caution: DO NOT OVER WET CARPET b.Wait 3-5 minutes before deep cleaning. Tip » Deep cleaning carpeting regularly can reduce dust and allergens in your home. www.bissell.com 800.237.7691 5