Bissell Rewind SmartClean® 58F83 User Guide - Page 6

Ocaution

Get Bissell Rewind SmartClean® 58F83 PDF manuals and user guides View all Bissell Rewind SmartClean® 58F83 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Operation Handle position Press the handle release pedal with your foot to place your BISSELL vacuum into one of three cleaning positions. 1. Upright For storage and above floor cleaning with tools. 2. Normal cleaning Press handle release pedal once. Use for most household floor cleaning tasks. 3. Low cleaning With the vacuum in normal cleaning position, press handle release pedal again, use for reaching under low furniture such as tables, chairs or beds. Height adjustment There are five height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - For low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting. Medium setting - For medium pile carpet. Highest setting - For high pile and most shag carpet. Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off the foot while turning. Transporting cleaner 1. To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the carrying handle. Clean carpet sensor (select models only) The Clean Carpet Sensor detects dirt being picked up while the vacuum is in use. When the vacuum is picking up dirt, the red light will come on. Occasionally, the lights may alternate quickly back and forth if the area is only lightly soiled or the dirt is spread out. For the best cleaning, continue to vacuum until the green light remains constantly illuminated. 6 www.bissell.ca caution: Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular, pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. Tip: Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose. 1-800-263-2535

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
6
www.bissell.ca
1-800-263-2535
Handle position
Press the handle release pedal with your foot
to place your BISSELL vacuum into one of three
cleaning positions.
1.
Upright
For storage and above floor cleaning with tools.
2.
Normal cleaning
Press handle release pedal once. Use for most
household floor cleaning tasks.
3.
Low cleaning
With the vacuum in normal cleaning position,
press handle release pedal again, use for
reaching under low furniture such as tables,
chairs or beds.
Height adjustment
There are five height settings available for vari-
ous floor surfaces. Turn the dial on the foot of the
cleaner to the desired setting.
Lowest setting – For low pile carpet or bare
floors. To pick up debris it may be necessary to
move up one setting.
Medium setting – For medium pile carpet.
Highest setting – For high pile and most shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest practical
setting.
If your cleaner is difficult to push,
adjust to the next higher setting.
If the dial is difficult to turn, tilt the cleaner back
slightly to take the weight off the foot while turning.
Transporting cleaner
1.
To move your cleaner from room to room, put
the handle in the upright position, tilt the clean-
er back on its rear wheels and push forward.
2.
The cleaner can also be moved by using the
carrying handle.
Clean carpet sensor
(select models only)
The Clean Carpet Sensor detects dirt being
picked up while the vacuum is in use. When
the vacuum is picking up dirt, the red light
will come on. Occasionally, the lights may
alternate quickly back and forth if the area is
only lightly soiled or the dirt is spread out. For
the best cleaning, continue to vacuum until the
green light remains constantly illuminated.
O
peration
CAUTION:
Before using your vacuum,
make sure that the dirt con-
tainer is in locked position and
that all filters (inner circular,
outer circular, pre-motor and
post-motor) are in place. Do
not operate your vacuum with-
out these filters.
Tip:
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the
vacuum hose.