Black & Decker MTC220 Instruction Manual - Page 8
Attaching The Auxiliary Handle, Height Adjustment, - black decker
View all Black & Decker MTC220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Attaching the Auxiliary Handle • To attach the handle, press in on the buttons (f) 5 • Push the handle completely onto the housing 7 and position it slightly until it on both sides of the upper "snaps" into place (figure 7). housing as shown in figure 5. f • To adjust the handle up or down, press in on the button (g) and raise or lower the handle. • The handle should be g adjusted so that your front arm is straight when the trimmer is in the working position. 6 • Position the handle as shown in figure 6 (with the BLACK+DECKER logo facing upward). Partially push the handle on so that it will hold the buttons in when you release them with your hand. HEIGHT adjustment • The overall height of the trimmer can be adjusted by 8 loosening the collar (h) and rotating it in the direction of the arrow shown in figure 8. • Move the upper housing straight up or down. When the desired height is achieved, tighten the collar h (h) by rotating it opposite of the direction shown in figure 8. 8