Black & Decker PD400LG Type 1 Manual - PD400LG - Page 7

Assembly and Adjustment Inserting and removing bits (figure C) • To install a hex shank screwdriver bit or C drill bit (10) simply insert it into the cavity in the hex spindle (6) until it snaps into place as shown in figure C. • To remove the bit pull it straight out. 10 6 Pivoting the tool head (figures D, E) The head of the tool can be pivoted for optimum D versatility. • Press the pivot release button (3) shown in figure D. 3 • Pivot the tool head to the inline position as shown in figure E. • Release the button. E WARNING: Check to make sure tool handle is locked after pressing pivot release button and changing screwdriver positions. WARNING: • To avoid being pinched at the areas indicated with black arrows, hold the screwdriver at both ends and use your thumb to depress the pivot release button (3) when changing positions. • Do not use screwdriver as a pry bar in any position. • To avoid screwdriver being turned on accidentally, do not carry in your pocket. F 2 Forward/Reverse/Lock off slider (figure F) • To select forward or reverse rotation, use the forward/reverse slider (2) (see arrows on the slider). NOTE: When the slider is in the central position the tool is locked off to prevent accidental actuation or battery discharge. However, the light ring will illuminate when the trigger is depressed. 7