Bosch B09IB81NSP Instructions for Use - Page 11
Home Connect
View all Bosch B09IB81NSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Home Connect This appliance is Wi-Fi-capable and can be remotely controlled using a mobile device. Note: Wi-Fi is a registered trade mark of the Wi-Fi Alliance. In the following cases, the appliance functions like a refrigerator without a network connection and can still be manually operated via the controls: ■ The appliance is not connected to a home network. ■ Home Connect service is not available in the country in which the appliance is set up. For an overview of the countries in which Home Connect is available, see www.home-connect.com. Note: ■ Please observe the safety information in these operating instructions and ensure that they are still observed with even if you operate the appliance using the Home Connect app and are not at home when doing so. See chapter Important safety instructions. You must also follow the instructions in the Home Connect app. ■ Operating the appliance directly from the appliance always has priority. During this time, it is not possible to operate the appliance using the Home Connect app. Setting up Home Connect Note: ■ Observe the Home Connect supplementary sheet, which is available for download under www.bosch-home.com with the instructions. To do so, enter the E-number of your appliance in the search field. ■ After switching on the appliance, wait at least two minutes until internal device initialization is complete. Only then start setting up Home Connect. ■ To implement settings with Home Connect, you have to install the Home Connect app on your mobile device. Observe the supplied Home Connect documents with regard to this. Follow the steps specified by the app to implement the settings. ■ The Home Connect menu will close automatically when the appliance is not operated for a lengthy period of time. You can find information on how to open the Home Connect menu at the start of the appropriate chapter. en-us Automatic connection with the home network (WLAN) If a WLAN router with WPS function is available, the refrigerator can automatically connect to the home network. 1. Press the Home Connect button 6. The temperature display refrigerator compartment 8 indicates Cn. 2. Press the refrigerator compartment temperature selection button 7 until the temperature display refrigerator compartment 8 indicates AC and the temperature display freezer compartment 4 indicates OF. 3. Press the freezer compartment temperature selection button 3. The appliance is ready for automatic connection. The temperature display freezer compartment 4 displays an animation for 2 minutes. The appliance is ready for automatic connection for as long as the animation is displayed. 4. Within those 2 minutes, activate the WPS function on the home network router (e.g. using the WPS/WLAN button; read the information on this topic in the router documentation). If the connection is successful, On flashes in the temperature display freezer compartment 4. The refrigerator is ready to connect with the app. Note: If the temperature display freezer compartment 4 indicates OF, no connection could be established. 1. Check whether the refrigerator is located within the range of the home network (WLAN). 2. Repeat the process or establish the connection manually. 11