Bosch B09IB81NSP Instructions for Use - Page 23

Appliance self-test, Customer service

Page 23 highlights

en-us Fault Possible cause Temperature display freezer A fault caused the freezer compart- compartment 4 flashes. ment to become too warm in the past. Appliance is not cooling, temperature display and light are lit. Showroom mode is switched on. Remedial action When the alarm button 5 is pressed, the temperature display 4 stops flashing. The temperature display indicates for five seconds the warmest temperature which was reached in the freezer compartment. Start appliance self-test (see chapter Appliance self-test). When the program has ended, the appliance switches over to normal operation. Appliance self-test Your appliance features an automatic self-test program which indicates sources of faults that may be repaired by customer service only. Starting the appliance self-test 1. Switch off the appliance and wait 5 minutes. 2. Switch on the appliance and then press and hold down the super button 2 for 3-5 seconds within the first 10 seconds until an audible signal sounds. The self-test program starts. While the self-test is running, a long audible signal sounds in the meantime. If 2 audible signals sound and the set temperature is displayed after the self-test has ended, your appliance is OK. If 5 audible signals sound and the freezer compartment super button flashes for 10 seconds after the self-test has ended, there is a fault. Inform customer service. Ending the appliance self-test When the program has ended, the appliance switches over to normal operation. Customer service If required, we recommend that you have the door hinges changed over by our customer service. You can find out the costs for changing over the door hinges from your customer service. Before you call customer service, see the chapter Rectifying minor faults yourself. After checking according to the chapter Rectifying minor faults yourself, additional help can be requested by calling the Bosch Customer Support Center, 1-800-9442904 (toll-free), from anywhere in the United States. In Canada contact your Bosch customer service or call 1-800-944-2904. Write down the following information about your appliance so that you have it ready and can get better assistance if you require support from customer service. Dealer's name: Address: Telephone number: Purchase date: Model number: FD number: Serial number Type E - Nr FD - Nr 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

en-us
23
Appliance self-test
Your appliance features an automatic self-test program
which indicates sources of faults that may be repaired by
customer service only.
Starting the appliance self-test
1.
Switch off the appliance and wait 5 minutes.
2.
Switch on the appliance and then press and hold
down the super button 2 for 3–5 seconds within the
first 10 seconds until an audible signal sounds.
The self-test program starts.
While the self-test is running, a long audible signal
sounds in the meantime.
If 2 audible signals sound and the set temperature is
displayed after the self-test has ended, your appliance is
OK.
If 5 audible signals sound and the freezer compartment
super button flashes for 10 seconds after the self-test
has ended, there is a fault. Inform customer service.
Ending the appliance self-test
When the program has ended, the appliance switches
over to normal operation.
Customer service
If required, we recommend that you have the door
hinges changed over by our customer service. You can
find out the costs for changing over the door hinges from
your customer service.
Before you call customer service, see the chapter
Rectifying minor faults yourself.
After checking according to the chapter Rectifying minor
faults yourself, additional help can be requested by
calling the Bosch Customer Support Center, 1-800-944-
2904 (toll-free), from anywhere in the United States.
In Canada contact your Bosch customer service or call
1-800-944-2904.
Write down the following information about your
appliance so that you have it ready and can get better
assistance if you require support from customer service.
Fault
Possible cause
Remedial action
Temperature display freezer
compartment 4 flashes.
A fault caused the freezer compart-
ment to become too warm
in the past.
When the alarm button 5 is pressed, the tem-
perature display 4 stops flashing.
The temperature display indicates for five sec-
onds the warmest temperature which was
reached in the freezer compartment.
Appliance is not cooling,
temperature display and
light are lit.
Showroom mode is switched on.
Start appliance self-test (see chapter Appliance
self-test).
When the program has ended, the appliance
switches over to normal operation.
Dealer’s name:
Address:
Telephone number:
Purchase date:
Model number:
FD number:
Serial number
Type
FD - Nr
E - Nr