Bosch B18IF70SLS Use & Care Manual - Page 25
Changing
View all Bosch B18IF70SLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Fault Ice is forming in the supply hose to the ice maker. Water is flowing out of the appliance. è Close shutĆoff valve immediately. Possible cause The water pressure is too low. The freezer compartment temperature is too low. The water pipe in the appliance is defective. The water pressure is too low. A wrong water valve has been installed. Remedial action Check water pressure. The water pressure must be between 25 and 120 p.s.i. (1.72ć8.25 bar). Check temperature of the freezer compartment. If required increase the temperature. Call customer service immediately. The valve may leak if the water pressure is too low. The water pressure must be between 25 and 120 p.s.i. (1.72ć8.25 bar). SelfĆtapping valves and 3/16 inch (4.76 mm) saddle valves reduce the water pressure and may eventually block the pipe. The manufacturer is not liable for damage to property due to an incorrect installation or water connection. Changing the bulb d WARNING d To avoid electrical shock which can cause severe personal injury or death, disconnect power to appliance before making repairs. After making repairs, reconnect power. q Switch off the appliance with the POWER button! CAUTION Never touch a halogen bulb with bare fingers. When inserting a glass halogen bulb, always hold with a soft cloth. We recommend that a service technician changes the bulb. Halogen bulbs above Halogen bulb type: 20 W/12 V/bulb holder G4 q Release and remove the cover. q Pull out the defective halogen bulb. q Attach the cover to the clip and lock into position. q Insert a new halogen bulb. Touch the halogen bulb with a soft cloth only. 25