Bosch B20CS51SNS Installation and Use & Care - Page 24

Switching, Disconnecting, Emptying the, water, appliance

Get Bosch B20CS51SNS - 20.2 cu. Ft PDF manuals and user guides View all Bosch B20CS51SNS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Switching on the appliance Switch on the appliance according to the enclosed operating instructions. Disconnecting the appliance Disconnect the appliance according to the enclosed operating instructions. If the appliance is to be disconnected or stored at temperatures below freezing point, empty the water tank for the drinking water dispenser. Emptying the water tank in the appliance q Pull out the main plug. q Cut off the water supply to the appliance. q Remove the motor compartment cover from the rear of the appliance. q Unscrew the connecting cable (1). q Place a shallow waterĆcollecting tray (capacity approx. 0.8 gallons (3 litres)) under the connection valve. q Unscrew, drain and screw back hose (2) and then hose (3) on the appliance connection valve. Important: Do not mix up the hose connections! q After draining the water tank, reĆattach the motor compartment cover. Switch on the appliance and then turn on the tap. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
25
Switching
on
the±appliance
Switch on
the
appliance
according
to±the
enclosed operating
instructions.
Disconnecting
the±appliance
Disconnect
the
appliance
according
to±the
enclosed operating
instructions.
If the
appliance
is
to
be
disconnected or stored
at
temperatures
below
freezing
point,
empty the
water tank
for
the
drinking
water
dispenser.
Emptying the
water
tank
in±the
appliance
q
Pull out
the
main
plug.
q
Cut off
the water
supply
to
the
appliance.
q
Remove the motor
compartment cover
from
the
rear
of
the appliance.
q
Unscrew
the connecting
cable
(1).
q
Place a shallow
waterĆcollecting
tray
(
capacity approx. 0.8±gallons
(3 litres)
) under
the connection
valve.
q
Unscrew, drain and screw
back
hose (2) and
then hose
(3) on
the appliance connection
valve.
Important:
Do
not
mix up the
hose connections!
q
After
draining
the water tank,
reĆattach the motor
compartment cover.
Switch on
the
appliance and then
turn
on
the
tap.