Bosch HBE5453UC Use and Care Manuals - Page 11

Setting the automatic timer, Basic Settings

Page 11 highlights

Switching the signal tone off Hold the TIMERS button down until the clock disappears. After seven minutes, the signal switches off automatically. Setting the automatic timer With the TIMER function, you can set an operating time duration or program a start and end time. Automatic switch-off 1. Press the TIMERS button down until the † symbol blinks. 2. Press the TIMERS button again. On the display, auto and šž§ blink. 3. Use the @ and A buttons to set the operating time duration. The operating time duration can be set from 1 minute to 10 hours. 4. Set the desired heating type and temperature. The oven starts. The Ž and auto signals light up on the display, the current time is displayed. The operating time duration has elapsed A signal sounds, auto blinks on the display. 1. Switch off the temperature selector and function selector. 2. Hold the TIMERS button down until the Ž symbol appears. The oven switches back to manual mode. Canceling the operating time duration To delete the setting, hold the TIMERS button down until the † symbol blinks on the display. Then press the @ and A buttons simultaneously. Automatic switch-on and switch-off Baking or roasting starts for the set duration at a later time which you chose. 1. Press the TIMERS button down until the † symbol blinks. 2. Press the TIMERS button again. On the display, auto and šž§ blink. 3. Use the @ and A buttons to set the operating time duration. The operating time duration can be set from 1 minute to 10 hours. 4. Press the TIMERS button again. auto and the Ž symbol blink on the display. The end time for the programmed operating time duration is displayed. 5. Adjust the end time with the @ and A buttons. The end time can be set up to 23 hours and 59 minutes. The oven calculates the start time. After 5 seconds, the time set is taken over. The Ž and auto signals go out, the current time is displayed. 6. Set the desired heating type and temperature. The oven will begin to heat at the calculated start time. On the display, the Ž and auto symbols light up. The operating time duration has elapsed A signal sounds, auto blinks on the display. 1. Switch off the temperature selector and function selector. 2. Hold the TIMERS button down until the Ž symbol appears. The oven switches back to manual mode. Canceling the operating time duration To delete the setting, hold the TIMERS button down until the † symbol blinks on the display. Then press the @ and A buttons simultaneously. Basic Settings You can always make the following basic settings: Basic setting Acoustic signal Time format * Factory setting Options ▯ quiet ▯ middle ▯ loud* ▯ 24 h* ▯ 12 h am/pm Adjust the signal volume The oven must be switched off. 1. Hold the @ and A button down until the colon blinks on the display. 2. Press the TIMERS button again. Signal appears on the display. 3. Press the A button repeatedly until the required volume is reached. Changing the time format The oven must be switched off. Press and hold the @ button for 3 seconds. „/... appears on the display. To change to the 24 h time format, hold the @ button down again for 3 seconds. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

11
Switching the signal tone off
Hold the TIMERS button down until the clock disappears.
After seven minutes, the signal switches off
automatically.
Setting the automatic timer
With the TIMER function, you can set an operating time
duration or program a start and end time.
Automatic switch-off
1.
Press the TIMERS button down until the
symbol
blinks.
2.
Press the TIMERS button again.
On the display,
auto
and
šž§
blink.
3.
Use the
@
and
A
buttons to set the operating time
duration.
The operating time duration can be set from 1 minute
to 10 hours.
4.
Set the desired heating type and temperature.
The oven starts. The
Ž
and
auto
signals light up on
the display, the current time is displayed.
The operating time duration has elapsed
A signal sounds,
auto
blinks on the display.
1.
Switch off the temperature selector and function
selector.
2.
Hold the TIMERS button down until the
Ž
symbol
appears.
The oven switches back to manual mode.
Canceling the operating time duration
To delete the setting, hold the TIMERS button down until
the
symbol blinks on the display. Then press the
@
and
A
buttons simultaneously.
Automatic switch-on and switch-off
Baking or roasting starts for the set duration at a later
time which you chose.
1.
Press the TIMERS button down until the
symbol
blinks.
2.
Press the TIMERS button again.
On the display,
auto
and
šž§
blink.
3.
Use the
@
and
A
buttons to set the operating time
duration.
The operating time duration can be set from 1 minute
to 10 hours.
4.
Press the TIMERS button again.
auto
and the
Ž
symbol blink on the display.
The end time for the programmed operating time
duration is displayed.
5.
Adjust the end time with the
@
and
A
buttons.
The end time can be set up to 23 hours and 59
minutes.
The oven calculates the start time. After 5 seconds,
the time set is taken over.
The
Ž
and
auto
signals go out, the current time is
displayed.
6.
Set the desired heating type and temperature.
The oven will begin to heat at the calculated start time.
On the display, the
Ž
and
auto
symbols light up.
The operating time duration has elapsed
A signal sounds,
auto
blinks on the display.
1.
Switch off the temperature selector and function
selector.
2.
Hold the TIMERS button down until the
Ž
symbol
appears.
The oven switches back to manual mode.
Canceling the operating time duration
To delete the setting, hold the TIMERS button down until
the
symbol blinks on the display. Then press the
@
and
A
buttons simultaneously.
Basic Settings
You can always make the following basic settings:
Adjust the signal volume
The oven must be switched off.
1.
Hold the
@
and
A
button down until the colon blinks
on the display.
2.
Press the TIMERS button again.
Signal
appears on the display.
3.
Press the
A
button repeatedly until the required
volume is reached.
Changing the time format
The oven must be switched off.
Press and hold the
@
button for 3 seconds.
/
appears on the display. To change to the 24 h time
format, hold the
@
button down again for 3 seconds.
Basic setting
Options
Acoustic signal
quiet
middle
loud*
Time format
24 h*
12 h am/pm
* Factory setting