Bosch HBL8752UC Installation Instructions - Page 3
Important Safety Instructions - installation manual
View all Bosch HBL8752UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
9 IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS S N I Y T E F A S T N A T R OD PA ME RI DNA IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR'S USE. INSTALLER: LEAVE THESE INSTALLATION INSTRUCTIONS WITH THE UNIT FOR THE OWNER. OWNER: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. WARNING When properly cared for, your new appliance has been designed to be safe and reliable. Read all instructions carefully before use. These precautions will reduce the risk of burns, electric shock, fire and injury to persons. When using kitchen appliances, basic safety precautions must be followed including those in the following pages. WARNING Do not repair, replace or remove any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage. Refer to this manual for guidance. All other servicing should be done by an authorized servicer. Appliance Handling Safety CAUTION ▯ Unit is heavy and requires at least two people or proper equipment to move. ▯ Do not lift appliance by door handle. ▯ Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance. EVAS ESEHT Electric Safety SNO I TCURTSN I WARNING Before you plug in an electrical cord or turn on power supply, make sure all controls are in the OFF position. Do not let cord hang over edge of table or counter or touch hot surfaces. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. It is unsafe to operate any appliance with a damaged power cord or plug. If the appliance has been damaged or malfunctions, safely disconnect the appliance from the power supply, then immediately contact an authorized servicer to inspect the product. To protect against electrical shock, do not immerse cord, plugs or other electrical parts in water or other liquid. For appliances equipped with a cord and plug, do not cut or remove the ground prong. It must be plugged in to a matching grounding type receptacle to avoid electrical shock. If there is any doubt as to whether the wall receptacle is properly grounded, the customer should have it checked by a qualified electrician. DO NOT use an adaptor or extension cord. If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit. Installer-show the owner the location of the circuit breaker or fuse. Mark it for easy reference. Safety Codes and Standards This appliance complies with the latest version of one or more of the following standards: ▯ UL 858, Household Electric Ranges ▯ UL 923, Microwave Cooking Appliances ▯ UL 507, The Standard for the Safety of Electric Fans ▯ CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to specific installations. WARNING Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. Refer to Rating Label for more information. See Rating Label section for rating label location. Be sure your appliance is properly installed and grounded by a authorized technician. Installation, electrical connections and grounding must comply with all applicable codes. 3