Bosch HBLP451RUC Installation Instructions - Page 12
Placing the Oven Into the Cabinet, Opening
View all Bosch HBLP451RUC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To remove the oven door: 1. Be sure to read the above WARNING before attempting to remove the door. 2. Open the door completely. 3. Flip levers on hinges toward you. 4. Holding the door firmly on both sides and using both hands, close the door gently until it stops against the levers, about 30º from the closed position. 1. The unit and its bottom packaging (pallet) should be positioned close to and in front of the cabinet opening prior to beginning to lift the unit into place. 5. Carefully lift the door up and out of the hinge slots. Hold firmly; the door is heavy. 6. Place the door in a convenient and stable location unitl you are ready to reinstall it. Placing the Oven Into the Cabinet Opening 9 CAUTION To avoid damage to the door do not lift, pull or push the unit during installation by using the oven door handle as a gripping point. Note: It is recommended to wear gloves and long sleeves to protect hands and forearms from abrasion and potential scratches during the lifting process. It is also recommended to take off watches and jewelry and to wear work shoes during installation for foot protection. When lifting the unit into place avoid grasping the upper element to avoid damaging it. See the illustration following for the correct lifting point. 2. Lift or slide unit into the cabinet cutout without allowing the unit base to contact the flooring. 3. Check that the conduit cable does not fall behind the unit during installation. It may help to run the conduit into the area it will be connected to (such as an overhead or adjacent cabinet) and tape the end down so it doesn't fall out while the unit is being slid into place. English 9